POCO X5 Pro 5G (`redwood`)


Vendor	Xiaomi
SoC	`sc7280`
Configuration	`make redwood_defconfig`
Maintainer	the HakiOS developers (README.md)
Repository	`devices/redwood/`
Firmware	`devices/redwood/pull-firmware.sh` pulls it from your own phone

What works

Part	State
display	works	the panel through UEFI's framebuffer; frames drawn by the GPU with gpu=1
touch	works	Goodix GT9916 / FocalTech FT3680 on SPI, multitouch (CONFIG_HAKIOS_GOODIX, touchscreen=1)
buttons	works	power and volume through the PMIC (CONFIG_HAKIOS_BUTTONS)
cpu	works	all 8 cores, the big core at 2.4 GHz (cpus=8 bootcpu=7 cpufreq=1)
gpu	works	Adreno 642L, OpenGL ES through Mesa (gpu=1); Metal: buffers and libraries, no drawing yet
storage	works	UFS read through the loader; /private/var kept with var_store=1 ufs_write=1
audio	works	speakers and microphone through the audio DSP (adsp=1 sound=4 mic=4)
battery	partly	the level in the UI through the audio DSP; charging under this kernel is not done
haptic	works	Awinic AW86927 (haptic=5)
camera	works	Camera.app (cam=5)
torch	partly	the PM8350C flash LED and Control Center's button (torch=N); not in the README's list of what works
wifi	works	WCN6750 with Linux's ath11k: radio, driver, a network joined (wifi=1)
bluetooth	no	step one only: a read-only look at its pins (bt=1)
cellular	partly	the modem boots, sees the network, the SIM is bound, IPA and en1 in place; no registration yet
thermal	partly	27 of 27 sensors read on the phone (thermal=1); the stop (thermal_stop=) not yet seen firing

The state is what has been seen on this device, written down in devices/redwood/device.conf; a part the table does not name has not been looked at.